Late September Update

Another mass shooting happened this month. Crazy guy with a gun. This one had warning signs, police contact, he self reported mental health issues, but no stopping him. I posted about Adam Lanza and my same thinking still applies. Here's a piece that was written about it

http://www.cnn.com/2013/09/17/opinion/granderson-gun-control-fail/index.html

This argument the writer presents agrees with mine when it comes to the response to mass shootings. I go past we need to look deeper. No one has the b@lls to address the real issues these shooters have. The reason gun owners are targeted is because its easy to blame the guns its harder to address troubled people capable of violence. There were warning signs but they weren't heeded. I will say this gun control expansion when it comes to mental health issues should be increased. This shooter not only had issues but also committed 2 gun crimes but still was allowed to purchase a gun. That needs to be addressed. None of the gun control laws passed here in MD would have stopped him from buying the gun, so I guess that invalidates my argument. What laws were passed that would have gotten him treatment or sentenced for the crimes he committed which would have prevented this shooting?


On a lighter note I cut my hand shucking oysters and had to visit patient first for a few stitches. I think the same DR. that sewed up my lip awhile back sewed up my hand yesterday. That was fun. My fear is the bill as I may have reached the out of pocket portion of my new health insurance. In an upcoming post I need to write about Obamacare (a name I hate but since I don't know the real name I'm going with it).

Early September

Ok new hobby alert: Paracord weaving. It all started with needing a motorcycle key chain. The old one scratched the bars and tank, so I needed a soft option. Hence the paracord. I had been seeing these paracord survival bracelets many places and then I saw some variations like a key FOB, dog collars and rifle slings. I figured I love tying knots so I would give it a try. I can't stop, I replaced all my keychains and making random pulls. So far I Used 150' of it and I need more.

Fishing first catfish of the year. These were rare in that we were fishing with metal lures. Cats usually come with bait.

Random

September paintball

Just a few shots of the mostly ex-ASIT paintball team

Baltimore All-stars are now back know as the Ravens

If you recall I referred to the Ravens as the Baltimore All-Stars last season due to the fact they could turn into another team when needed as seen by the Super Bowl Victory. This season the Ravens need to prove they deserve that title again, because after that first game this year all I can say is: WTF?

Cabinet project

In the back of my basement there is a nice little corner that us under utilized from a storage perspective. I decided to build a cabinet to mount in that space. Essentially it is a wall cabinet modelled after any kitchen cabinet except bigger. This is 15" wide 20" deep and 75" tall. Why did I build this as oppossed to buying one? Well I couldnt find a suitable off the shelf cabinet that size. If they were that tall they were too wide or not as deep. The other issue is I wanted this cabinet to perserve and protect the contents from water mainly and dust. That is why I wanted real wood that I could finish and a door I could gasket. So I drew up some plans and got out the table saw and proceeded to build a cabinet. The first issue I ran into was how to join the various sides and frame pieces together. I had planned to just nail the pieces edge to edge, but after doing some research I found the Kreg jig system (mentioned last month). I settled on a plywood base and sides and a 1x3 face frame. The door is going to be 1x3 frame with Birch panels and a Birch back panel. Once the rough cuts were made for the cabinet I set about making the door. This was a bit of a challenge since I planned to build a frame and install panels. The first pictures show the issue with that. I cut the frame members for the door then I cut a channel for the panels to pit it. The issue was I cut the channels full length thus not leaving anything to screw the frames together with. My solution was cut shims to fill the channel, then glue them in place and finally sand them to the correct height. After overcoming that issue; I set about building the cabinet up. One key to the Kreg jig is to clamp the joints before screwing them in. Most joints regular clamps work, although I had to buy 36" ones. I ordered the corner clamp/vice you see in the picture holding the base or top in place as it gets screwed in. This was a Kreg product (ordered from Amazon). It worked well for the outside corners. As you can see in the next set of pictures I got it all together. The next step was the hardest which was sanding. I wanted the surface pretty nice to accept the finishing. This took a lot of work, which I question the amount I put into it and my choice in materials. The ply wood portions were the worst and since it was not finish grade took a bunch of effort to make it even close to smooth. I shouldn't say that, close to not splintery if I am honest. Once done, I took it into the garage for finishing. The choice for finishing was tough. As it wasn't intended to be a piece of furniture on display it wouldn't seem critical, but I wanted to protect the wood. There had been a minor dishwasher leak a few years ago and the area where I placed the cabinet got dripped on and I wanted some protection in case another water issue may happen. After some research I settled on a light color stain followed by polyurethane. Must parts took 2 coats of stain to cover well. The poly step I figured I didn't want to go overboard again just enough to protect not make a museum piece. I got the wipe on type. This seem to build up at all, it seemed to just soak in to the wood so I was using way too much. In the end Brush on poly was the way to go. I left the wipe on the interior but I went back and covered all the surfaces with brush on, which went on great (probably because there was so much wipe on under it?). A few lessons were learned during this (some are outlined in the comments in the process tree). The biggest is a random orbit sander, even with 220 grit will tear right through your finish. You have to start and stop the sander in contact with the wood. Setting the sander on it while spinning will not work. Here is the task list for the finishing steps and the pictures in the garage show the various states of the process. Rough sand all pieces 80 grit (I found out this is not needed on finish grade portions ie 1x materials) Light sand outer 180 grit Vacuum Wipe with tack cloth (found out air would work better to remove dust) Make shelves/supports finish Make back Stain  Wait 4-6 hours Stain Poly Fine sand 220 grit between coats (caution is needed here...) 2-3 hours Poly Almost done. Took the cabinet to the basement to install. First I caulked the seems and nailed the back cover in place. The the mounting then commenced. I built a base frame in place to rest the cabinet on (8" off the floor) for mounting. This corner where it's going gives the ability to screw into 2 studs on the right side and 1 stud on the back. I set the cabinet on the frame and used a finish nailer hold it in place for me to drill the mounting holes through the cabinet and into the studs. I then bolted it up using 1/4" lag like bolts. A few more things to do. The door got hinges attached then the door was mounted. The 2 shelves were mounted using wood mounting brackets. Next the latch was put on. It is an outdoor gate latch which had to have it's receiving bracket modified to fit the frame, but it is working well. Last major step was to put on a gasket that ran around the door jam (this is working very well as indicated by the amount of finishing fumes smelled when opened, these had dissipated from the exterior in a week). One more thing the final touch was a motion activated LED light to light up the interior. The final fitting out of the cabinet I am leave out as it is an on going process specific to the contents to be housed there in. All in all this was a very satisfying process. I enjoyed the design and using the Kreg jig to build the cabinet up. The biggest take away is if you are going to finish a project start with quality wood. I spent more than a few weekends on this one, but taking my time and having patience leads to better results every time.  

Finished

August Boating Trip to The Harbor

Took a little Cruise to the Harbor to hit a restaurant for my sister's Birthday.  It was a rare thing that my boat left the dock and fishing wasn't involved.  The cruise took about how long I expected about an hour and it was a weekend so we had to slow down in the no wake zones.    

Had this nice sunset as we came back in to Middle River: